3. ASSEMbLY
3.1.
referring to the individual components in fig.1. assemble the
Injector Puller minus the force screw as shown in fig.2. overleaf. a
different configuration of the bridge legs may be needed
depending on engine.
fig.4
4. OPERATION
4.1.
Before working on the fuel system, make sure that the fuel system
is
NOT
pressurised. refer to the manufacturer's instruction
manual on how to de-pressurise the system.
4.1.1. Disconnect the injector wires and connections as per the
manufacturer's instructions.
4.1.2. remove any carbon build up from around the injector.
4.1.3. remove the cap from the injector using the appropriate size
socket (fig.3A).
4.2. Removing Inner Sleeve.
(fig.3).
4.2.1. remove the internal parts from the injector to gain access to use
the security hex key (fig.3.6). It may be necessary to remove the
injector veins by force. Insert the security hex into the inner sleeve.
Turn the security hex anti-clockwise using a 21mm socket to
remove the inner sleeve (fig.3B).
4.2.2. Select the appropriate force screw and screw into the threads of
the injector and tighten with a suitable spanner (fig.3c).
4.3. Removing the injector.
(fig.4)
It will be necessary to remove the engine cam cover and possibly
a manifold bolt, please refer to the manufactures manual for
instruction. The removal of certain bolts will give bolt suitable for
the bridge legs to use.
4.3.1. Slide the bridge assembly over the force screw inserting the legs
into the appropriate holes for a sturdy footing (fig.4D).
Note:
one leg is flat and is so to be used on the top of the cylinder head
and not to be inserted into a bolt hole.
4.3.2. Screw the force screw nut onto the force screw until finger tight.
4.3.3 using the appropriate spanners hold the force screw and tighten
the nut, the injector should gradually slide out.
4.3.4. If the injector cannot be removed, it may be necessary to consult
a main dealer or a diesel specialist, to avoid damage to the engine.
4.3.5. When an injector has been removed, it is recommended that only
a new or refurbished injector is fitted. follow manufacturers fitting
and safety instructions.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
no liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business
Park
,
Bury St. Edmunds, Suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
VS2005 Issue: 1 - 23/05/11
fig.3
