Release Tab
Ratchet lever
9
Damage to labels shall be prevented by keeping them away from sharp edges of the load and, if possible, from the load.
9
The webbing shall be protected against friction, abrasion and damage from loads with sharp edges by using protective sleeves
and/or corner protectors.
2. INTRODUCTION
M
anufactured from polyester webbing with stitched reinforcement around hooks. Auto-rewind at a push of a button retracts the webbing,
leaving the unit neat and tidy. Simple drum and ratchet mechanism tensions the webbing to provide superior load restraint. Suitable for
securing of loads and tarpaulins onto flatbeds or trailers. Handles and release mechanism are rubber coated for added comfort.
3. SPECIFICATION
4. OPERATION
NOTE:
If unsure of requirements for specific application
of Tie Down, seek professional advice
.
4.1.
INSTALLING THE STRAP
4.1.1.
Depress the Release tab (fig.1) and draw out as much strap length
as required.
4.1.2.
Locate strap hooks to desired fixing points and, using the ratchet
lever (fig.1), tighten the strap to the required tension.
4.2.
RELEASING THE STRAP
4.2.1.
Depress the Release tab (fig.1) and allow the strap to lengthen
sufficiently enough to enable the strap hooks to be removed from
their fixing points.
4.2.2.
Once disconnected, depress the Release tab to allow the strap
to fully withdraw into the ratchet housing.
NOTE:
For additional information see the Sealey YouTube channel.
5. MAINTENANCE
5.1.
After use, thoroughly wipe down the strap and the ratchet
body using a soft, clean and dry cloth.
5.2.
Store the unit in a clean, dry environment.
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Model No.
Breaking
Strain
H
ook
Maximum
Tension
Webbing
Length
Webbing
Width
Quantity
A
TD25301
600 kg
S-Type
300 kg
3 m
25 mm
1
A
TD50301
1500 kg
S-Type
750 kg
3 m
50 mm
1
ATD25301, ATD50301 Issue 1 18/11/21
fig.1