5. ASSEMBLY
5.1.
BOTTOM PANEL ASSEMBLY
5.1.1.
Secure the metal feet (
fi
g 2 - 8) to the bottom panel (
fi
g 2 - 7) with M6 x 12 cross head screws (
fi
g 2 - 3).
5.1.2.
Locate and thread the adjustable feet (
fi
g 2 - 9) into the bottom panel.
5.2.
PANEL ASSEMBLY
5.2.1.
Prior to panel assembly lay a soft mat or similar on the
fl
oor to protect the paint
fi
nish
5.2.2.
Attach right side panel (
fi
g 3 - 4) to back panel (
fi
g 3 - 2) by sliding it’s edge into the groove on the side edge of the back panel.
5.2.3.
Repeat for left side panel (
fi
g 3 - 15).
5.3.
BOTTOM PANEL AND SIDES ASSEMBLY
5.3.1.
Locate and align bottom panel assembly
fi
xing holes with the
fi
xing holes in the side and bottom panel assembly (
fi
g 4).
5.3.2.
Secure with M6 x 12 cross head screws (
fi
g 4 - 3).
5.4.
TOP PANEL TO SIDES ASSEMBLY
5.4.1.
Locate and align top panel (
fi
g 5 - 1) with
fi
xing holes in the side panels and secure with M6 x 12 cross head screws (
fi
g 5 - 3).
5.4.2.
Secure top panel (
fi
g 5 - 1) to front
fi
xing holes on side panels with M6 x 12 cross head screws (
fi
g 5 - 3).
5.5.
FINAL PANEL FIXINGS
5.5.1.
With the assistance of another person rotate the cabinet assembly onto it’s side (
fi
g 6).
5.5.2.
Secure the remaining
fi
xings of the bottom panel assembly and top panel with M6 x 12 cross head screws (
fi
g 6 - 3).
5.6.
ATTACHING THE SHELVES
5.6.1.
With the assistance of another person stand the cabinet upright (
fi
g 7).
5.6.2.
Insert the shelf supports (
fi
g 7 - 6) into the slots on the back panel and
inner face of the front panel, at the desired heights.
5.6.3.
Fit the shelf (
fi
g 7 - 5) onto the appropriate set of shelf supports.
5.6.4.
Press the shelf
fi
rmly until locked onto the shelf supports.
5.6.5.
The shelves can be adjusted by removing them o
ff
the supports and
repositioning the supports at the new desired height.
5.7.
ATTACHING THE DOOR
NOTE:
The door (fig 8 - 11) has a pin fitted at the bottom and a spring bolt fitted at the top.
5.7.1.
Locate the bottom pin into the hole at the front of the base unit assembly (
fi
g 8).
5.7.2.
Pull the top spring pin down and align with the hole in the top panel rail (
fi
g 8).
5.7.3.
Release the top spring to allow the bolt to locate into the hole.
5.8.
ATTACHING THE DOOR HANDLE
5.8.1.
Locate the door handle (
fi
g 9 - 14) to it’s corresponding
fi
xing holes, on the door, and secure with M4 x 8 cross head screws
(
fi
g 9 - 13).
APMS21 Issue 1 30/07/21
Original Language Version
© Jack Sealey Limited
fi
g.2
fi
g.3
fi
g.4
fi
g.5
fi
g.6
fi
g.7