6. OPERATION
7. MAINTENANCE
6.1.
If selecting manual grease gun (fig.3.2), swop the canister from the air operated gun (fig.3.1).
6.2.
Screw in the grease delivery tube (fig.3.3 or fig.3.4) and tighten with a 12mm spanner.
6.3.
To adjust the finger grip/head angle, loosen the wing nut (fig.3.5).
WARNING!
Disconnect gun from air supply before changing accessories, servicing or performing maintenance.
Replace or repair
damaged parts.
Use genuine parts only.
Unapproved parts may be dangerous and will invalidate the warranty.
7.1.
Lubricate the air tool daily with a good grade of air tool oil such as Sealey ATO/500 or ATO/1000. If the compressed air system has no
oiler, a few drops of oil can be poured into the air inlet of the gun each day.
7.2.
When not in use, disconnect from air supply, clean and store in a safe, dry, childproof location.
Note: Faults in the compressed air system may cause loss of power or erratic action. Reduced compressor output, excessive drain on
the air line, moisture or restrictions in air pipes or the use of hose connectors of incorrect size may reduce the air supply.
Grit or gum deposits in the tool will reduce power and may be removed by flushing out the gun with gum solvent oil or an equal mixture
of SAE 10 oil and kerosene.
fig.2
fig.3
AK45KIT Issue: 1 - 14/08/14
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Original Language Version
© Jack Sealey Limited
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
5.4.3. Operate the filler pump to fill the container tube.
5.4.4. Disconnect the grease gun from the filler pump.
5.4.5. Press the catch plate and release the plunger rod. Push down on the plunger handle.
