3.
4. CARE MAINTENANCE
4.1
Clean unit with a damp cloth. Do not use solvents.
4.2
To maintain its long term efficiency the battery should be recharged before it is fully depleted.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
AK3306 Issue: 2 - 11/01/12
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of
in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
Contact your local solid waste authority for recycling information.
Battery Removal
WARNING!
To avoid electric shock, ensure the battery is fully discharged
1.
Lift up the winding handle and remove the small screw from the base, then twist the base
anti-clokwise and pull the base off.
2.
Then remove the four screws on the body of the lamp and split the lamp in two.
3.
Remove the four small black screws holding the winding gear in, then cut the wires connecting
the battery to the circuit board.
Dispose of batteries according to local authority guidelines
.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform
potential purchasers of products containing batteries (as defined within these regulations), that they are
registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705
3.2
OPERATION.
3.2.1
On/Off Switch.
The Work Light has a 4 mode On/Off switch.
The first press illuminates 1 LED.
The second press illuminates 3 LEDs.
The third press illuminates 9 LEDs.
The fourth press switches the Work LIght Off.
Using the button, cycle through the options until you reach the one you require.
3.2.2 The lantern has a convenient hanging hook and a built in compass as seen at the top of Fig.1.
