background image

3TONNE LOW ENTRY TROLLEY JACK WITH 

ROCKET LIFT

MODEL NO: 

3000LE SERIES

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

 

9

   Ensure the jack is in sound condition and good working order. Take action for immediate repair or    

 

  replacement of damaged parts. Use recommended parts only. The use of improper parts may be    

 

  dangerous and will invalidate the warranty.

 

9

   Locate the jack in an adequate, well lit working area for its function.

 

9

   Keep working area clean and tidy and free from unrelated materials.

 

9

   Use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.

 

9

   Place wedges under wheels of vehicle (but ensure wheels of jack can move freely ).

 

9

   Ensure the vehicle handbrake is engaged (or in “PARKED” mode), and switch the engine off.

 

9

   Ensure minimum distance of 0.5m between vehicle tilt & static objects such as doors, walls, etc.

 

9

   Ensure all non essential persons keep a safe distance whilst the jack is in use.

 

9

   Ensure there are no passengers in the vehicle to be jacked up.

 

9

   Place jack under vehicle manufacturer’s recommended lifting points (see vehicle hand book).

 

9

   Check that the lifting point is stable and centred on the jack saddle.

 

9

   Ensure the jack wheels are free to move and that there are no obstructions.

 

‰

  

WARNING: 

The jack is a lifting device only.

 

9

   To support the load always use axle stands (available from your Sealey stockist).

 

9

   Ensure there are no persons or obstruction beneath the vehicle before lowering.

 

9

   Use a qualified person to lubricate and maintain the jack.

 

9

   Use only hydraulic jack oil.

 

9

   When not in use store jack in a safe, dry, child proof area in the lowered position.

 

8

  

DO NOT

 jack vehicle which may result in spillage of fuel, battery acid, or dangerous substances.

 

8

  

DO NOT

 work under the vehicle until axle stands have been correctly positioned.

 

8

  

DO NOT

 operate the jack if damaged.

 

8

  

DO NOT

 exceed the rated capacity of the jack.

 

8

  

DO NOT

 use the jack for purposes other than which it is intended.

 

8

  

DO NOT

 top up the hydraulic unit with brake fluid. Use hydraulic oil only.

 

8

  

DO NOT

 allow untrained persons to operate the jack.

 

8

  

DO NOT

 allow the vehicle to move whist lifting or lowering.

 

8

  

DO NOT

 use the jack to move vehicle.

 

8

  

DO NOT

 adjust the safety overload valve.

2.  INTRODUCTION

Twin piston Rocket Lift feature brings saddle to maximum height in minimal strokes. Universal joint release 

mechanism allows safer, more controlled lowering of jack. Profiled lifting arm gives low clearance height of just 

85mm making it suitable for sports and custom cars. Heavy-duty steel chassis provides stability and endurance. 

Fitted with an overload valve for added safety. Hydraulic oil bypass system protects ram from being overextended.

3.  SPECIFICATION

MODEL NO: ............................................................. 3000LE

Capacity: ..................................................................... 3tonne

Consumable Parts: ....Replacement Rubber Jack Pad - JP17

Length: ....................................................................... 702mm

Maximum Chassis Height: ......................................... 153mm

Maximum Saddle Height: ........................................... 500mm

Minimum Saddle Height: .............................................. 85mm

4.  ASSEMBLY

4.1. 

Push top section of handle into bottom section. Rotate until push button locates into hole in top section, to secure.

4.2. 

Loosen location bolt at the side of the handle base. Insert jack handle and tighten the bolt.

3000LE Series Issue 1 30/04/2021

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

 Wear safety 

footwear

1 3 5

2 4 R

TJL3

Chock

wheels

Never

exceed

jack capacity

Close

Raise

Lower

Lift & twist

to lower

OR

Use on a hard level floor

Apply

handbrake

w w w. s e a l e y. c o . u k

Use suitable axle stands

X2

Raise

Отзывы: