instructions for
trolley jack 2 tonne low entry
rocket lift
model no:
2001le SerieS
thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. Safety
9
ensure the jack is in sound condition and good working order. take action for immediate repair or replacement of damaged parts. use
genuine parts only. the use of improper parts may be dangerous and will invalidate the warranty.
9
locate the jack in a suitable, well lit working area.
9
Keep working area clean and tidy and free from unrelated materials.
9
use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.
9
chock wheels of vehicle.
9
ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or “PArK” if automatic).
9
ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc., to allow for vehicle tilting.
9
ensure all non-essential persons keep a safe distance whilst the jack is in use.
9
ensure there are no passengers in the vehicle.
9
Place jack under only those lifting points recommended by vehicle manufacturer (see vehicle handbook).
9
check that the lifting point is stable and centred on the jack saddle.
9
ensure the jack wheels are free to move and that there are no obstructions.
▲
DanGer:
use the jack for lifting only,
not
for supporting the lifted load.
9
use suitable axle stands under the vehicle before proceeding with any task.
9
use a qualified person to lubricate and maintain the jack.
9
ensure that only
hydraulic jack oil
is used in the jack
8
Do not
operate the jack if damaged.
8
Do not
allow untrained persons to operate the jack.
8
Do not
exceed the rated capacity of the jack.
8
Do not
allow the vehicle to move during lifting or lowering, or use the jack to move the vehicle.
8
Do not
jack vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
8
Do not
work under the vehicle until appropriately rated axle stands have been correctly positioned.
8
Do not
use the jack for purposes other than that for which it is intended.
8
Do not
top up hydraulic system with brake fluid. use hydraulic jack oil only. (sealey Part no: HJo500mls or HJo5ls)
8
Do not
adjust the safety overload valve.
9
When not in use store jack, fully lowered, in a safe, dry, childproof location.
2. introDuction
twin piston rocket lift feature brings the saddle to maximum height in 6 strokes. universal joint release mechanism allows safer, more
controlled lowering of jack. Profiled lifting arm gives low clearance height of 74mm making it suitable for sports and custom cars. Heavy duty
steel chassis provides stability and endurance. fitted with an overload valve for added safety. Hydraulic oil by pass system protects ram from
being overextended.
3. Specification
Model no: ....................................................2001le SerieS
capacity: ..................................................... 2 tonne (2000kg)
minimum saddle Height: ..............................................
74mm
maximum saddle Height: ..............................................
514m
maximum chassis Height: .......................................... 150mm
length: .......................................................................
740mm
Weight: ...........................................................................32Kg
2001LE SERIES | Issue 2 06/03/17
Original Language Version
© Jack sealey limited
refer to instruction
manual
Wear safety
footwear
fig.1
