background image

                                                                                                                               

               

                                                                             

 

 

21 

 
         © Sealevel Systems, Inc. 

4030 Manual   |  SL9362           9/2021 

 

Appendix C

 Compliance Notices 

 

Federal Communications Commission (FCC) Statement 

T

his equipment has been tested and found to comply with the limits for Class A digital 

device,  pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in such case the user will be required to correct 
the interference at the 

user’s

 expense. 

 

EMC Directive Statement  

Products bearing the CE Label fulfill the requirements of the EMC directive (89/336/EEC) 
and of the low-voltage directive (73/23/EEC) issued by the European Commission. To obey 
these directives, the following European standards must be met: 

 

EN55022  Class  A

 - 

“Limits  and  methods  of  measurement  of  radio  interference 

characteristics of information technology equipment”

 

 

 

EN55024 

 

“Information  technology  equipment  Immunity  characteristics  Limits 

and methods of measurement”.

  

 

 

This is a Class A Product. In a domestic environment, this product may cause radio interference in 
which case the user may be required to take adequate measures to prevent or correct the 
interference. 

 

 

 

 

Always use cabling provided with this product if possible. If no cable is provided or if an alternate 
cable is required, use high quality shielded cabling to maintain compliance with FCC/EMC 
directives. 

 

 

 
 

 
 

 

 

Содержание PIO-48























Отзывы: