SeaLevel ISO-16.PCI, Руководство пользователя

Страница: 13 / 21

13
© Sealevel Systems, Inc.
8006H Manual | SL9023H 9/2021
PROGRAMMING THE ISO-16.PCI, CONTINUED
Interrupt Mode Select Table
Interrupt source is Base+0 bit D0. When selecting the Interrupt Type, always disable interrupts prior to
changing or setting states. This will help prevent inadvertent or unexpected interrupts from occurring.
IRC1 IRC0 Interrupt Type
0 0 Low Level
0 1 High Level
1 0 Falling Edge
1 1 Rising Edge
When using the High and Low Level interrupts, an interrupt occurs when input D0 changes to either
a High or Low state. This will cause the computer to remain in an interrupt state until the input state
changes.
Interrupt Read
Reading the Interrupt Status port (Base+5) clears any interrupt pending.
IRQST (D0) Interrupt Status 1 = interrupt pending, 0 = none