7
© Sealevel Systems, Inc.
HUB7M Manual | SL9184 10/2021
Installation
Windows 98/ME/2000/XP/Vista™ Operating Systems
1.
The HUB7M is fully supported as a generic USB
hub device in Windows 98/ME/2000/XP/Vista/7™
operating systems and requires no separate driver.
2.
Simply connect the included wall-mount power supply to the HUB7M and connect to an AC outlet.
When the unit is successfully powered, the green LED will light.
3.
Using the included SeaLATCH USB device cable, plug the HUB7M into an available USB port on your
host system.
4.
The ‘Found New Hardware’ screen will
appear, and the hub will be automatically recognized as a
generic USB hub device. When the unit is successfully recognized by the operating system, the
yellow LED will light. During data transfers, this light will blink.
5.
The hub is ready to use when you see the screen ‘Your USB hub is installed and ready to use.’
Windows NT is not USB aware and thus cannot support this device.
LINUX SUPPORT
USB devices are supported in Linux kernel v2.4 or better. Refer to the help files included with your Linux
distribution for specific instructions on adding generic USB hub devices.
For additional support, please
call Sealevel Systems’ Technical Support, (864) 843
-4343. Our technical support
is free and available from 8:00AM-5PM Eastern Time, Monday through Friday. For email support contact:
