Introduction
Sealevel Systems
DIO-32.PCI
Page
2
Installation
Windows 98/ME/NT/2000/XP Installation
Do not install the Adapter in the machine until the software has been fully installed.
1.
Start Windows.
2.
Insert the Sealevel Systems CD in to your CD drive.
3.
If ‘Auto-Start’ is enabled for this drive the software will automatically launch. Otherwise, point your
browser to the ‘Index.htm’ on the root of the CD
4.
Select ‘Install Software’.
5.
Select the part number for your adapter from the listing.
6.
Select ‘Windows 98/ME/NT/2000/XP’ the setup file will automatically detect the operating environment
and install the proper components. Next (depending on the OS version) select the ‘Run from current
location’ or ‘Open’ option. Follow the information presented on the screens that follow. During setup the
user may specify installation directories and other preferred configurations. This program also adds entries
to the system registry that are necessary for specifying the operating parameters for each driver. An
uninstall option is also available to remove SeaIO files and registry/INI file entries from the system.
Windows NT Card Installation
: After accomplishing the above steps, bring up the Control Panel and double-click
on the SeaIO Devices icon. To install a new card, click "Add Port". Repeat this procedure for as many SeaIO cards
as you wish to install.
Linux Installation
Note:
You need to have "root" privileges to install the software and drivers.
1.
Login as "root".
2.
Mount the CDROM by typing:
mount -t iso9660 /dev/hdc /cdrom
Note
Your cdrom may not be /dev/hdc it could be /dev/hda, /dev/hdb, /dev/hdd, or if you have a SCSI drive
/dev/sda, /dev/sdb, /dev/sdc, etc. You may mount the CDROM to any location, the /cdrom is just a common
example.
3.
Next change to the directory where you mounted the CDROM:
Ex. cd /cdrom/software/SeaIO/Other/linux
Note:
The syntax is case sensitive.
4.
Copy seaio .tar.gz to your home directory by typing:
cp seaio .tar.gz ~
5.
Change to your home directory by typing:
cd
6.
Unmount the drive and then Unzip and Untar the drivers and software by typing:
umount /cdrom
tar -xvzf seaio .tar.gz
