SeaLevel 7802ec Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 29

SeaLevel 7802ec Скачать руководство пользователя страница 10

10

© Sealevel Systems, Inc. 7802ec &7802ecS Manual | SL9680 11/2022

On-board LED signal indicators

Driver

D1

D2

D3

D4

D5

Loaded

Heartbeat (1 sec on/off)

M1

M0

Heartbeat

Power

Not Loaded

Heartbeat

Heartbeat Heartbeat Heartbeat

Power

(a)

Power LED (D5) is lit when card is powered

(b)

If the driver is not loaded, four (4) LEDs (D1–D4) flash with the heartbeat signal and
the serial port remains in tristate mode until the driver loads.

(c)

If the driver is loaded, two (2) LEDs (D2–D3) reflect the current Port 1 mode in
accordance with the table above, whether the mode was set by DIP switch or
software control.

(d)

M1 and M0 are lit if the DIP switch is OFF.

Software Installation

Windows Installation

Do not connect the hardware until the software has been fully installed

.

Only users running Windows 7 or newer should utilize these instructions for accessing and
installing the appropriate driver via Sealevel’s website. If you are utilizing an operating system
prior to Windows 7, please contact Sealevel by calling 864.843.4343 or emailing

[email protected]

to receive access to the proper driver download and installation

instructions.

To install Sealevel software, you must log in as an administrator or have administrator

privileges.

1.

Begin by locating, selecting, and installing the correct software from the

Sealevel software

driver database

2.

Type in or select the part number (#

7802ec

) for the adapter from the listing.

3.

Select “Download Now” for SeaCOM for Windows.

4.

The setup files will automatically detect the operating environment and install the proper
components. Follow the information presented on the screens that follow.

5.

A screen may appear with text similar to: “The publisher cannot be determined due to the
problems below: Authenticode signature not found.” Please click the ‘Yes’ button and
proceed with the installation. This declaration simply means that the operating system is
not aware of the driver being loaded. It will not cause any harm to your system.

«
...
8
9
10
11
12
...
»

Содержание 7802ec






























Отзывы:

Нет отзывов