©Sealevel Systems, Inc.
270U Manual
13
SL9179 05/2012
SeaI/O Mounting Kit
The HUB7M is ideal for adding USB ports to a Relio R1000 embedded
solid-state industrial computer (as shown), SeaPAC touchscreen HMI
system, or a SeaI/O data acquisition “stack”. Order the expansion kit
(Item# KT122) that includes four metal straps and four #4-40 metal
screws.
DIN Rail Mounting
The HUB7M is available with a factory-installed DIN-rail mounting clip.
Alternatively DIN-rail mounting clips can be ordered as a field upgrade
kit (Item# DR104
)
. The bracket with clip is easily attached using two
included #4-40 Phillips head machine screws.
Table/Wall Mounting
The flush mount bracket kit (Item# KT123
)
is extremely versatile and
can be used to mount the HUB7M from the top, bottom, or back edge.
The hub alone or with a stack of SeaI/O modules can be mounted flat
to a tabletop, underneath a counter, or inside an enclosure. The kit can
be used to mount the hub flat to a wall, or along the back edge, similar
to DIN-rail mounting options.
Universal Mounting Bracket
The universal mounting bracket (Item# KT125) can be used as a
“backpack” to other USB peripheral devices to the HUB7M. The
universal arrangement of slots and holes accept bolt sizes to M4 and
can be used for virtually any mounting configuration. The bracket also
has holes for both 75mm and 100mm VESA mounting options.
