Sealer Sales OnPak Gen 3.0, Инструкция по эксплуатации, Страница: 3 / 8

1. Safet Precaution (Alwa s Read)
The "Safety Precautions" explains extremely important
precautions that must be taken to prevent injury to the
person using the equipment as well as to others and
to prevent damage to property.
The following is an explanation of the symbols used···
&
Danger
:
This indicates items that if ignored could
lead to serious injury or death.
&
Warning
:
This indicates items that if ignored could
lead to slight injury or damage to property.
Examples of the Indicators
0:
This symbol means "Do Not".
: This symbol means "Do Not Allow".
(I} :
Never Disassemble
@ :
Keep Away From Water
C
:
Unplug the Power Supply
0:
General Information
2
®
©
0
0
0
�
&warning
Never allow water to come in direct contact with the unit.
In addition, never install the unit in a location where it will
be exposed to water.
* Contact with water may damage the equipment or
cause electrical shock.
Never modify or disassemble the unit.
* Never disassemble, repair or modify the unit in any way.
Failure to follow these precautions may cause fire,
electrical shock or injury.
Never allow unattended children to use the unit.
Always place the unit in a location that is out of reach of children.
* Failure to follow these precautions may result in electrical
shock or injury.
Never place pins, needles or other such foreign objects into
opening on the unit.
* Failure to follow these precautions could result in electrical
shock or injury.
Never use the unit in the following environment.
* Never use the unit in an area with a high ambient temperature,
such as an area exposed to direct sunlight.
* Never use the unit in an area where it will be exposed to dust,
debris or corrosive gases.
* Never use the unit where it will be exposed to shock or impact.
* Failure to follow these precautions may cause the unit to fail
as well as invite serious accidents, such as electrical shock.
Never touch the plug or any controller parts with wet hands.
Never spill water on the unit.
* Failure to following these precautions may result in electrical
shock. Stop using the unit immediately if it should come in
contact with water.
DO NOT ALLOW the tip of the handset (Horn) to touch
when the unit is plugged into the power source.
* Plastic MUST ALWAYS be between the handset
(Horn)when the unit is plugged into the power source & the
handset is depressed.
3