Restrooms
Installation must be ADA compliant.
Whenever possible, always mount the soap dispenser direct to a wall instead of a mirror or
other installed fixture.
o
Always use screws to attach dispenser to wall when wall mounted.
Anytime space is available, mount dispenser just to the left or right of a mirror.
o
Leave about 1/4" to 1/2" space between mirror and dispenser - just enough for it to
open/shut freely and without obstruction.
o
IntelliCare
TM
Hybrid Dispenser’s must be mounted a minimum of 12 inches (30.5 cm)
between the bottom of the dispenser and any horizontal surface to assure proper
operation of the dispenser. (Be sure dispenser is still meeting ADA height
requirements)
When installing dispensers for sink modules with multiple wash basins, use good judgment
when determining how many dispensers should be installed. A single dispenser should be
sufficient in serving a module with two wash basins, while 2 dispensers should be sufficient
to serve a module with 3 wash basins.
o
See enclosed examples for placement ideas.
Install only on a mirror when all other possibilities have been exhausted.
Food Service Areas
It is recommended to always mount a soap dispenser direct to a wall instead of the sink’s
backsplash whenever possible.
o
Always use screws to attach dispenser to wall when wall mounted.
Anytime space is available, mount dispenser just to the left or right of the sink.
o
Leave about 1/4" to 1/2" space between sink and dispenser - just enough for it to
open/shut without hitting the sink).
o
IntelliCare
TM
Hybrid Dispenser’s must be mounted a minimum of 12 inches (30.5 cm)
between the bottom of the dispenser and any horizontal surface to assure proper
operation of the dispenser. (Be sure dispenser is still meeting ADA height
requirements)
Avoid mounting a dispenser too high or too low. Always attempt to mount in close
proximity of the actual use area.
Do not install a hand soap dispenser directly above any surface where food will be
prepared.
In food service areas, a hand soap dispenser (and soap) is required at every hand wash
sink.
Install only on the sink backsplash when all other possibilities have been exhausted.