30
T E C H N I C A L S P E C I F I C A T I O N S
M
ECHANICAL
Dimensions (H x W x D)
78”w x 32”d x 50”h (198 cm x 81 cm x 127 cm)
Net Weight
630 lbs. (286 kg)
Shipping Weight (in crate)
1080 lbs. (490 kg)
Roller Construction
Two high release silicone-covered rollers
Mechanical Requirements
2 CFM compressed air @ 100 psi, 0.25” (0.6 cm) ID
flexible line
P
ROCESS
Max. Working Width
61” (155 cm) maximum
Max. Roller Speed
10 fpm (3.1 mpm)
Core Inner Diameter
3” (7.6 cm)
Maximum Material Outside Diameter
8” (20.3 cm)
Maximum Roller Opening
1-1/8” (2.9 cm)
Maximum Board Thickness
1” (2.54 cm)
Nip Settings
0, 1/16, 1/8, 3/16, 1/4, 3/8, 1/2, 3/4, 1 and –1/16”
(0, 2, 3, 5, 6, 10, 13, 19, 25 and -2 mm)
E
LECTRICAL
R
EQUIREMENTS
Single phase version - Domestic
120-240 VAC 50/60 Hz, 2W + G, 2 Amp
Single phase version - International
208-240 VAC 50/60 Hz, single phase, 2 Amp
Maximum Power consumption
240 watts
O
RDER
C
ODES
SEAL
®
Image
®
600-C Single phase - Domestic
IT-600-CD
SEAL
®
Image
®
600-C Single phase - International
IT-600-CI1
Each SEAL
®
Image
laminator has a Serial Number Label located on the right side cabinet when facing the rear. This
label indicates the model type, the electrical requirements, and the laminator serial number (important for reference if
any servicing is required).
