©2010 RLE Technologies. All rights reserved. RLE is a registered trademark, and
SeaHawk, Falcon, and Raptor are trademarks of RLE Technologies. All other
trademarks or registered trademarks are the property of their respective companies.
Although the information contained in this document is believed to be accurate and
correct, RLE Technologies assumes no responsibility, and disclaims all liability, for
any damages resulting from the use of this information or any error or omission in this
document. RLE Technologies does not warrant, guarantee, or make any
representations as to the performance, fitness for use, safety, or reliability of any
existing or future wiring, equipment, additions or modifications to equipment, or any
other component of the original or modified system. Specifications are subject to
change without notice. Part number 110083 Rev. 1.0 6/2010
104 Racquette Drive
Fort Collins, CO 80524
970.484.6510
www.rletech.com
IMPORTANT
RLE strongly recommends that low-voltage and high-voltage wiring
are not placed in the same conduit. Electrical interference could result.
Conduit Knockouts
24VDC Output with Cables
Power (On/Off) Switch
AC Power Input Terminal
Block
Conduit Knockouts
WARNING
A dedicated circuit breaker must be provided within
close proximity to the enclosure and be clearly marked
as the disconnecting device for the unit inside the
enclosure.
