SPITFIRE - 2030 mm
Instruction Manual.
6
3/ 32” Hole.
Install the switch into the precut hole in the
side, in the fuselage.
Trim and cut.
Switch.
INSTALLING THE STOPPER ASSEMBLY.
2) Using a modeling knife, cut one length
of silicon fuel line. Connect one end of the line
to the weighted fuel pick up and the other end
to the nylon pick up tube.
1) Using a modeling knife, carefully cut
off the rear portion of one of the 3 nylon tubes
leaving 1/2” protruding from the rear of the
stopper. This will be the fuel pick up tube.
Balsa
INSTALLING THE SWITCH RECEIVER
INSTALLING THE SWITCH ENGINE
Trim and cut.
Switch.
