11
www.seagullmodels.com
Switch.
Trim and cut.
3/ 32” Hole.
INSTALLING THE SWITCH.
Install the switch into the precut hole in the
side, in the fuselage.
Throttle servo arm.
Elevator servo arm.
Rudder servo arm.
Trim and cut.
Switch.
String.
Small weight.
INSTALLING THE AILERON - FLAP SERVOS.
Servos.
Small weight.
Thread.
1) Using a small weight (
Weighted fuel pick-up
works well
) and string, feed the string through
the wing as indicated.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of
the mount allow the servo lead to pass through.
