RENO AIR CARE YAK-11 “PERESTROIKA”
Instruction Manual.
20
1) Tape the cowl to the fuselage using
low-tack tape.
2) Use a drill and drill bit to drill the holes
for the cowl mounting screws. Make sure
the cowl position is correct before drill-
ing each hole.
3) With the muler, needle valve, and
spark/ glow plug removed from the en-
gine, slide the cowl in place over the en-
gine. Temporarily install the propeller
and spinner in order to id the exact loca-
tion of the cowl. When satisied with the
cowl placement, secure the cowl to the
fuselage using masking tape.
4) Install the muler and muler exten-
sion onto the engine and make the cutout
in the cowl for muler clearance. Connect
the fuel and pressure lines to the carbu-
retor, muler and fuel iler valve. Secure
the cowl to fuselage using the M3x10mm
socket head screws. Putting a small length
of silicon fuel tube under the head of the
screw helps with vibration.
9
.
10
.
5
.
6
.
7
.
8
.
