HARMON ROCKET III.
Instruction Manual.
8
Attach servo lead to the aileron servo. Attach
the string to the servo lead and carefully thread
it though the wing. Once you have thread the
lead throught the wing, remove the string so it
can use for the other servo lead. Tape the servo
lead to the wing to prevent it from falling back
into the wing.
We recommended to use long ser-
vos arm for all servos without throttle
servo.
Because the size of servos differ,
you may need to adjust the size of the
precut opening in the mount. The notch
in the sides of the mount allow the servo
lead to pass through.
Install the rubber grommets and brass
collets onto the aileron servo. Test fit the servo
into the aileron servo mount.
Install the servo into the servo tray.
Using a small weight (
Weighted fuel pick-up
works well
) and thread, feed the string through
the wing as indicated.
Small weight.
Thread.
Wing bottom.
INSTALLING THE AILERON SERVOS.
Remove covering.
Glue attached.
Servo.
Small weight.
Thread.
