Seagull Models Decathlon 60-85cc-3D Скачать руководство пользователя страница 2

Страница: 2 / 62

DECATHLON 60-85cc-3D

Instruction Manual.

Thank you for choosing the

DECATHLON 60-85cc-3D

ARTF by

SG MODELS

. The

DECATHLON 60-85cc-3D

was designed with the intermediate/advanced sport fly-

er in mind. It is a semi scale airplane which is easy to fly and quick to assemble. The air-

frame is conventionally built using balsa, plywood to make it stronger than the av-

erage ARTF, yet the design allows the aeroplane to be kept light. You will find that

most of the work has been done for you already. The motor mount has been fitted and

the hinges are pre-installed. Flying the

DECATHLON 60-85cc-3D

is simply a joy.

This instruction manual is designed to help you build a great flying aeroplane. Please read

this manual throughly before starting assembly of your

DECATHLON 60-85cc-3D

Use the

parts listing below to indentify all parts.

Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is ca-

pable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU

ASSUME ALL RISK & REPONSIBILITY.

If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C

supplier and join your local R/C model Flying Club. R/C Model Flying Clubs offer a variety

of training procedures designed to help the new pilot on his way to successful R/C flight.

They will also be able to advise on any insurance and safety regulations that may apply.

INTRODUCTION

WARNING

KIT CONTENTS

Содержание Decathlon 60-85cc-3D































































Результаты поиска

Содержание Decathlon 60-85cc-3D

Отзывы:

Похожие инструкции для Decathlon 60-85cc-3D

Бренды по названию

Популярные бренды

Seagull Models Decathlon 60-85cc-3D, Инструкция по сборке

Результаты поиска

Содержание Decathlon 60-85cc-3D

Отзывы:

Похожие инструкции для Decathlon 60-85cc-3D

Бренды по названию

Популярные бренды