4. Maintenance
Ag/AgCl reference cell (SSC) is maintenance free.
After using the tester:
1). Rinse the reference cell and test probe in fresh water.
2). Dry all parts after use and keep them in the box.
3). Store in a dry, safe place.
5. Troubleshooting
Problem
Possible solution
No display
Check that the test probe lead and reference
cell are plugged into the correct place. The
battery is dead. Replace the battery.
Reading is
inaccurate
Check the wire of the reference cell. Replace
it if there is any damage. Clean the surface of
Zinc reference cell using fine sand paper.
Any damage Contact Seaguard International for
replacement.
6. Specifications
Measurement range
-2.500 to +2.500 volts
Measurement accuracy 0.5%
AD resolution
16 bits
Input impedance
>10
8
Ω
Display
TFT LCD 1.8”, 320x220
Power
3 AAA Batteries
Auto shutdown
No button action for 2.5 minutes
Manual shutdown
Press power button >2 seconds
Data stored
Maximum 50 measurement values
Working temperature
-10°C to 50°C
Dimensions
142 mm x 63 mm x 32 mm
7. For more information
For more information, please check out our website
seaguardinternational.com
10
