TapeStor 8GB Installation Manual
21
may be listed as a Conner drive). If your new tape
drive is not listed, refer to the Troubleshooting
section on page 28.
Run Seagate Backup Exec. Look down the list of target
drives in the “Where to back up” menu box, as
shown in the figure at left. If your backup device is
listed in this drop-down list (it may be listed as a
Conner device), then Seagate Backup Exec has
recognized your new drive.
Your tape drive and software are now ready to back up
data.
If you have problems accessing your tape drive, see
the Troubleshooting section on page 28.
For instructions on using Seagate Backup Exec to
backup your files, see the online software manual on
your Seagate Backup Exec CD.
For operation and maintenance instructions for your
tape drive and cartridges, see the following page.
c
8gbig.pm6
7/14/97, 2:54 PM
21
