Seagate ST9120315AS - Momentus 5400.6 120 GB Hard Drive, Руководство по эксплуатации продукта

Страница: 23 / 48

Momentus 5400.6 SATA Product Manual, Rev. F 17
2.13 Reliability
Measurement type Specification
Nonrecoverable read errors 1 per 10
14
bits read, max.
Annualized Failure Rate (AFR) <0.48%
Load/Unload (U/UL)
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 10% relative humidity
55°C, 16% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Warranty For information regarding Warranty Support, visit
http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance
2.13.1 Free Fall Protection feature
The Free Fall Protection feature provides enhanced data protection against shock events that may occur while
the drive is operating. This feature is designed to decrease the likelihood of data loss by detecting a free fall
event and unloading the actuator before a shock takes place in falls of >8 inches (nominal). The drive uses a 0
G sensor mounted on the printed circuit board assembly (PCBA) to sense this event.
To enable the Free Fall Protection feature on ST9500325ASG, ST9320325ASG, ST9250315ASG,
ST9160314ASG, ST9120315ASG and ST980313ASG models, use Set Features command 41h. To disable
this feature, use Set Features command C1h.
Information about Free Fall Events that have occurred is available through SMART attribute FEh.
Note. Of the models documented in this product manual, the Free Fall Protection feature is provided only
on ST9500325ASG, ST9320325ASG, ST9250315ASG, ST9160314ASG, ST9120315ASG, and
ST980313ASG models.