Seagate ST9100011FS, Руководство по эксплуатации продукта

Страница: 12 / 52

6 Pulsar.2 Product Manual, Rev. A
*One GB equals one billion bytes when referring to drive capacity. Accessible capacity may vary depending on operating environment and
formatting.
Sustainable 4KB Random IOPs for 5 year Endurance
(65%/35% R/W 70% Duty Cycle)
23,000 22,000
Startup current (typical) 12V / 5V (peak) 0.34 / 0.47 amps
Voltage tolerance (including noise) 12V ± 5% / 5V ± 5%
Case temperature
0° to 60°C (operating)
–40° to 70°C (nonoperating)
Temperature gradient (°C per hour max)
20°C (operating)
20°C (nonoperating)
Relative humidity
5% to 95% (operating)
5% to 95% (nonoperating)
Relative humidity gradient 20% per hour max
Wet bulb temperature (°C max) 28
Altitude, operating
–60.96 m to 3048 m
(–200 ft. to 10,000+ ft.)
Altitude, nonoperating
(below mean sea level, max) –60.96 m to 12,192 m
(–200 ft to 40,000+ ft)
Operational Shock (max at 0.5ms) 1000 Gs
Non-Operational Shock (max at 0.5ms) 1000 Gs
Vibration, random operating 20–2000 Hz: 11.08 Grms
Vibration, random nonoperating 20–2000 Hz: 11.08 Grms
Nonrecoverable read errors, max 1 LBA per 10
16
bits read
Annualized Failure Rate (AFR) 0.44%
Warranty
To determine the warranty for a specific drive, use a web browser to
access the following web page:
support.seagate.com/customer/warranty_validation.jsp
You will be asked to provide the drive serial number, model number (or
part number) and country of purchase. After submitting this information,
the system will display the warranty information for your drive.
Lifetime Power cycles 50,000
Supports Hotplug operation per
Serial ATA Revision 2.6 specification
Yes
Drive specification ST400FM0012 ST200FM0012 ST100FM0012