Seagate ST750LX003 Скачать руководство пользователя страница 7

Страница: 7 / 44

Momentus XT Product Manual, Rev. B

1.0

Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate

Momentus

XT model drives:

These drives provide the following key features:

• 7200-RPM spindle speed.

• 32MB buffer.

• Quiet operation. Fluid Dynamic Bearing (FDB) motor.

• High instantaneous (burst) data-transfer rates (up to 3Gbs).

• Perpendicular recording technology.

• State-of-the-art cache and on-the-fly error-correction algorithms.

• Addition of NAND Flash memory to enhance drive performance.

• Native Command Queuing (NCQ) with command ordering.

• Full-track multiple-sector transfer capability without local processor intervention.

• 900 Gs nonoperating shock and 350 Gs of operating shock.

• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

• The 3D Defense System™, which includes Drive Defense, Data Defense and Diagnostic Defense, offers the

industry’s most comprehensive protection for disc drives.

• Support for S.M.A.R.T. drive monitoring and reporting.

• Support for Read Multiple and Write Multiple commands.

Standard models

ST95005620AS

ST93205620AS

ST92505610AS

Содержание ST750LX003













































Результаты поиска

Содержание ST750LX003

Отзывы:

Бренды по названию

Популярные бренды

Seagate ST750LX003, Руководство по эксплуатации продукта

Результаты поиска

Содержание ST750LX003

Отзывы:

Бренды по названию

Популярные бренды