manualshive.com logo in svg

Seagate ST625211CF, Руководство по эксплуатации продукта

Поделиться
Скачать
Seagate ST625211CF Скачать руководство пользователя страница 11

ST1 Series Product Manual, Rev. A

1

1.0

Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate

®

 ST1

®

Series drives:
• ST650211CF and ST625211CF Compa Type II disc drives.
• ST650211FX and ST625211FX Flex (IDE interface) disc drives.

These drives provide the following key features:
• 3,600-RPM spindle speed and 2-Mbyte buffer combine for superior performance.
• Quiet operation. Fluid Dynamic Bearing (FDB) motor.
• Giant magnetoresistive (GMR) recording heads and EPRML technology, which provide the drives with 

increased areal density.

• State-of-the-art cache and on-the-fly error-correction algorithms.
• 1.5K Gs nonoperating shock, and 200 Gs operating shock.
• SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• The 3D Defense System™, which includes Drive Defense, Data Defense, and Diagnostic Defense, offers the 

industry’s most comprehensive protection for disc drives.

Figure 1. ST1 Series Compa disc drive

Figure 2. ST1 Series Flex (IDE interface) disc drive

Содержание ST625211CF







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды