Seagate Surveillance HDD Product Manual, Rev. F
7
*All specifications above are based on native configurations.
** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating
environment and formatting.
* ** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
Wet bulb temperature (max)
37.7°C max (operating)
40.0°C max (nonoperating)
Altitude, operating
–304m to 3048m
(–1000 ft to 10,000 ft)
Altitude, non-operating
(below mean sea level, max)
–304m to12,192m
(–1000ft to 40,000+ ft)
Operational shock (max)
70 Gs at 2ms (read)
40 Gs at 2ms (write)
Non-operational shock (max)
300 Gs at 2ms
Vibration, operating
2Hz to 22Hz: 0.25 Gs, Limited displacement
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
Vibration, non-operating
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
Idle***
2.5 bels (typical)
2.6 bels (max)
Seek
2.6 bels (typical)
2.7
bels (max)
Non-recoverable read errors
1 per 10
15
bits read
Mean Time Between Failure (MTBF)
1,000,000 hrs
Warranty
To determine the warranty for a specific drive, use a web browser to access the following
web page:
http://www.seagate.com/support/warranty-and-replacements/
From this page, click on “Check to see if the drive is under Warranty”. Users will be asked
to provide the drive serial number, model number (or part number) and country of
purchase. The system will display the warranty information for the drive.
Load/unload cycles (25°C, 50% rel. humidity)
600,000 at 25°C, 50% rel. humidity
Supports hotplug operation per the
Serial ATA Revision 3.2 specification
Yes
Table 1
Drive specifications summary for 6TB and 5TB models
Drive Specification*
ST6000VX0001
ST5000VX0001
