Seagate Desktop SSHD Product Manual, Rev. K
19
3.4
Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-
mounting holes. Refer to
Figure 4
and
Figure 5
for drive mounting dimensions. Follow these important mounting
precautions when mounting the drive:
• Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.120 inch (3.05mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
Figure 3
Mounting dimensions (4TB model)
BOTH SIDES
5
TOP OF
LABEL
0.138 in
3.51 mm
2.00 in / 50.80 mm
0.814 in / 20.68 mm
CL OF CONN
DATUM B
CL OF DRIVE
4.010 in max
101.85 mm
5.787 in
146.99 mm
max
640 ± .050 in / 17.27 ± 1.27 mm
1.090 ± .050 in
25.73 ± 1.27 mm
Temperature
Check Point
4.00 in
101.61 mm
1.028 in / 26.11 mm max
3x 0.250 ± .010 in
6.35 ± .25 mm
1.122 ± .020 in
30.99 ± .51 mm
3x 6-32 UNC-2B
3 MINIMUM THREAD DEPTH
0.12 MAXIMUM FASTENER
PENETRATION BOTH SIDES
1.638 in
41.61 mm
4x 6-32 UNC-2B
3 MINIMUM THREAD DEPTH
0.12 MAXIMUM FASTENER
PENETRATION
2x 3.740 in
98.25 mm
2x 1.750 in
44.45 mm
2x 1.625 ± .020 in
41.28 ± .15 mm
2x 0.130 in
3.18 mm
