Seagate ST32122A - Medalist 2.1 GB Hard Drive, Руководство по установке

Страница: 8 / 48

4 Medalist 4342, 3232 and 2122, Rev. C
One drive or two?
If your new Seagate drive will be the only drive in your computer,
you do not have to change any jumper settings. In this case, skip
ahead to “Attaching Cables and Mounting the Drive,” on page 6.
If you already have one hard drive in your computer and you are
installing a second drive, you must configure one drive as a mas-
ter and the other as a slave.
To configure the drive as a master or one drive only:
•
Place a jumper on pins 5 and 6 (see Figure 1 on page 5).
The master drive will be the “boot” drive (drive C), from which
the computer loads system software when it first starts up.
To configure the drive as a slave:
•
Remove all the jumpers.
•
If you need to change the jumpers on your existing hard drive,
see the Disk Manager online manual, look on the drive label,
or contact the drive manufacturer.