manualshive.com logo in svg

Seagate ST320UM001, Руководство по эксплуатации продукта

Поделиться
Скачать
Seagate ST320UM001 Скачать руководство пользователя страница 15

Seagate Laptop Thin SSHD SATA Product Manual, Rev. E

  14

 Drive Specifications 

2.12

Agency Certification

2.12.1

Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency.

2.12.2

Electromagnetic Compatibility (EMC)

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility Directive 
(2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product standards for Information Technology 
Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, 
we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with 
properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm 
EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic 
Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory 
(RRL) Communications Commission, Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. 
Drives are tested in a representative, end-user system by a Korean-recognized lab.

Certificate number:

KCC-REM-STX-L-ThinSSHD

Trade name or applicant:

Seagate Technology LLC

Certificate date:

13 December, 2012

Manufacturer/nationality:

USA, Singapore and China

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic 
Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).

2.12.3

FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each 
drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal Communications 
Commission verification or certification of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power 
supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified 
assemblies is likely to result in interference to radio and television reception.

Radio and television interference 

This equipment generates and uses radio frequency energy and if not installed and used in strict accordance 

with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined 
by turning the equipment on and off, users are encouraged to try one or more of the following corrective measures:

Reorient the receiving antenna.

Move the device to one side or the other of the radio or TV.

Move the device farther away from the radio or TV.

Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

If necessary, users should consult the dealer or an experienced radio/television technician for additional suggestions. Users may find helpful the 
following booklet prepared by the Federal Communications Commission: 

How to Identify and Resolve Radio-Television Interference Problems

. This 

booklet is available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication number 
004-000-00345-4.

Содержание ST320UM001




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды