Seagate ST320LT033 Скачать руководство пользователя страница 15

S

EAGATE 

U

LTRA 

M

OBILE 

HDD P

RODUCT 

M

ANUAL

, R

EV

. C

  11

 D

RIVE 

S

PECIFICATIONS 

2.11

R

ELIABILITY

Nonrecoverable read errors

1 per 10

14

 bits read, max

Load/Unload (U/UL) 
 
25°C, 50% relative humidity

 
 
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles

Warranty

From this page, click on “Check to see if the drive is under Warranty”. Users will be asked 
to provide the drive serial number, model number (or part number) and country of purchase. 
The system will display the warranty information for the drive.

2.12

A

GENCY 

C

ERTIFICATION

2.12.1

Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency.

2.12.2

Electromagnetic Compatibility (EMC)

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility 
Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product standards for 
Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 
55024.

Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the 
test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly 
designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and 
system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the 
Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the 
Radio Research Laboratory (RRL) Communications Commission, Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B 
products. Drives are tested in a representative, end-user system by a Korean-recognized lab.

Certificate number:

KCC-REM-STX-Ultrathin

Trade name or applicant:

Seagate Technology LLC

Certificate date:

2013-04-19

Manufacturer/nationality:

USA, Singapore and China

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the 
Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).

2.12.3

FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As 
such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal 
Communications Commission verification or certification of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, 
power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart

 

J, Part 15 of the FCC rules. Operation 

with noncertified assemblies is likely to result in interference to radio and television reception.

Radio and television interference

 

This equipment generates and uses radio frequency energy and if not installed and used in strict 

accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installation. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which 
can be determined by turning the equipment on and off, it is recommended to try one or more of the following corrective measures:

To determine the warranty for a specific drive, use a web browser to access the following 
web page: 

http://www.seagate.com/support/warranty-and-replacements/

Содержание ST320LT033
































Отзывы: