Seagate ST15150DC Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 102

background image

ST15150N/ND/W/WD/WC/DC Product Manual, Rev. D

3

2.0

Applicable standard and
reference documentation

Seagate takes all reasonable steps to insure that its products are certifiable
to currently accepted standards. Typical applications of these disc drives
include customer packaging and subsystem design.

Safety agencies conditionally certify component parts, such as the Barra-
cuda disc drive, based on their final acceptability in the end-use product. The
subsystem designer is responsible for meeting these conditions of accept-
ability in obtaining safety/regulatory agency compliance in their end use
product and certifying where required by law.

2.1

Standards

The Barracuda disc drive is a UL recognized component per UL1950, CSA
certified to CSA C22.2 No. 950-M89, and VDE certified to VDE 0805 and
EN60950.

If this model has the CE Marking, it complies with the European Union
requirements of the Electromagnetic Compatibility Directive 89/336/EEC of
03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and
Directive 93/68/EEC of 22 July 1993.

Seagate uses an independent laboratory to confirm compliance to the above
directives. Drives are tested in representative systems for typical applica-
tions. The selected system represents the most popular characteristics for
test platforms. The system configurations include:

• 486, Pentium, and PowerPC Microprocessors
• 3.5-inch floppy disc drive
• Keyboard
• Monitor/display

Although the test system with this Seagate model complies to the directives,
we cannot guarantee that all systems will comply. The computer manufac-
turer or system integrator shall confirm EMC compliance and provide CE
Marking for their product.

The Barracuda disc drive is supplied as a component part. It is the respon-
sibility of the subsystem designer to meet EMC/regulatory requirements.
Engineering test characterizations of radiated emissions are available from
the Seagate safety department.

2.2

Applicable reference documents

Barracuda 4 Installation Guide

Seagate part number: 83328870

SCSI-2 Interface Product Manual (volume 2)

Seagate part number: 77738479

ANSI small computer system interface (SCSI) documents

ANSI X3.131-1986

(SCSI-1)

X3T9.2/86-109 Rev. 10H

(SCSI-2)

X3T9.2/91-010 Rev. 10

(SCSI-3) Parallel Interface

In case of conflict between this document and any referenced document, this
document takes precedence.

«
...
11
12
13
14
15
...
»

Содержание ST15150DC







































































































Отзывы:

Нет отзывов

Похожие инструкции для ST15150DC

Бренд: Quest Engineering Страницы: 540

Express5800/R120f-2E

Бренд: NEC Страницы: 36

TotalStorage DS300

Бренд: IBM Страницы: 110

System storage DS6000 Series

Бренд: IBM Страницы: 298

System storage DS6000 Series

Бренд: IBM Страницы: 58

Бренд: IBM Страницы: 78

Бренд: M-system Страницы: 3

Бренд: Yamaha Страницы: 3

Azure StorSimple 8100

Бренд: Microsoft Страницы: 12

AccuRAID AR316X12

Бренд: Sans Digital Страницы: 8

Бренд: Rocsecure Страницы: 10

Бренд: U-Line Страницы: 39

Exos ST2000NM0075

Бренд: Seagate Страницы: 42

Бренд: Yardmaster Страницы: 24

Бренд: SonicWALL Страницы: 56

Бренд: morse Страницы: 6

Бренд: morse Страницы: 4

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды