Seagate SurveiSRS HDD Product Manual, Rev. D
27
www.seagate.com
• the pre-charge power pins and the other ground pins.
• the signal pins and the rest of the power pins.
3.
There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed
in a blind-mate backplane configuration.
4.
All used voltage pins (V
x
) must be terminated.
4.3
Supported ATA commands
The following table lists Serial ATA standard commands that the drive supports.
For a detailed description of the ATA commands, refer to the Serial ATA International Organization:
Serial ATA Revision 3.2 (http://www.sata-io.org).
See “S.M.A.R.T. commands” on page
35.for details and subcommands used in the S.M.A.R.T. implementation.
Table 8
Supported ATA commands
Command name
Command code (in hex)
Check Power Mode
E5
H
Configure Stream
51
H
Device Configuration Freeze Lock
B1
H
/ C1
H
Device Configuration Identify
B1
H
/ C2
H
Device Configuration Restore
B1
H
/ C0
H
Device Configuration Set
B1
H
/ C3
H
Device Reset
08
H
Download Microcode
92
H
Execute Device Diagnostics
90
H
Flush Cache
E7
H
Flush Cache Extended
EA
H
Format Track
50
H
Identify Device
EC
H
Idle
E3
H
Idle Immediate
E1
H
Initialize Device Parameters
91
H
Read Buffer
E4
H
Read DMA
C8
H
Read DMA Extended
25
H
Read DMA Without Retries
C9
H
Read FPDMA Queued
60
H
Read Log Ext
2F
H
Read Multiple
C4
H
Read Multiple Extended
29
H
Read Native Max Address
F8
H
