Seagate Enterprise Capacity 2.5 HDD v3 SATA Product Manual, Rev. E
9
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels
.
Temperature gradient
(°C per hour max)
20°C (operating)
20°C (nonoperating)
Relative humidity
5% to 95% (operating)
5% to 95% (nonoperating)
Relative humidity gradient
20% per hour max
Altitude, operating
–304.8 m to 3,048 m
(–1000 ft to 10,000+ ft)
Altitude, nonoperating
(below mean sea level, max)
–304.8 m to 12,192 m
(–1000 ft to 40,000+ ft)
Operational Shock (max at 2 ms)
25 Gs
Non-Operational Shock
(max at 2 ms)
400 Gs
Vibration, operating
10–500 Hz: 0.5 Gs
Operation Rotational vibration
20–1500Hz: 16 rads/s²
Vibration, nonoperating
10–500 Hz: 2.4 Grms ref
Drive acoustics, sound power (bels)
Idle**
2.8 (typical)
3.0 (max)
Performance seek
3.2 (typical)
3.4 (max)
Nonrecoverable read errors
1 sector per 10
15
bits read
Annualized Failure Rate (AFR)
0.44% based on 8760 POH
Warranty
To determine the warranty for a specific drive, use a web browser to access the following web page:
http://www.seagate.com/support/warranty-and-replacements/
.
From this page, click on the “Is my Drive under Warranty” link. The following are required to be provided:
the drive serial number, model number (or part number) and country of purchase. The system will display
the warranty information for the drive.
Load-unload cycles
300,000 (25°C, 50% rel. humidity) (600,000 design life testing)
Supports Hotplug operation per
Serial ATA Revision 3.2 specification
Yes
Drive specification
ST2000NX0243
ST2000NX0283
ST2000NX0253
ST2000NX0303
ST2000NX0403 ST1000NX0423
ST1000NX0313
ST1000NX0353
ST1000NX0303
ST1000NX0343
