© 2017 Seagate Technology LLC. All rights reserved.
Publication number: 100807728, Rev. F October 2017
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SeaTools and 3D Defense System are
either a trademark or registered trademark of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark
of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective
owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.
Call 877-PUB-TEK1(877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different
standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage.
Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment
and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for
more information, visit
), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.
Document Revision History
a
Revision
Date
Pages affected and Description of change
Rev. A
09/06/2016
Initial release
Rev. B
11/21/2016
fc: Placed latest BarraCuda logo on cover
5: Recording technology bullet changed to SMR
9: Revised Section 2.7.1 Power consumption & Table 4
12: Revised Section 2.7.4 Power management modes & Table 5
16: Updated Korean text for MSIP statement
Rev. C
11/28/2016
6 & 13: Combined Operating Temperature spec lines into “Operating temperature = 0°C to 60°C”
Rev. D
02/22/2017
fc, 5, 7, 9 & 29-31: Added SED & SED-FIPS models & added pertinent notes, bullets & cross-references
7: Added Power-off/Flush Command note after Table 1
7 & 16: Revised Rated Workload statements
16: Added Section 2.11.1 Data loss under power interruption with write cache enabled
19-20: Updated mechanical drawings
22-24 Added Sections 4.0 About FIPS & Section 5.0 About (SED) Self-Encrypting Drives
Rev. E
09/22/2017
18-21: Updated Sections 2.12 through 2.13.3
24: Inserted: Figure 5: Mounting Dimensions (for 1-disk models) (alternate basedeck)
Rev. F
10/06/2017
23-25: Updated Figures 4-6 (mechanical drawings)
