manualshive.com logo in svg

Seagate ST1000LM035, Руководство по эксплуатации продукта


Поделиться
Скачать
background image

Seagate Mobile HDD Product Manual, Rev. A

  6

1.0

Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate® Mobile HDD model drives:

 

For more information on SED drives see 

About (SED) Self-Encrypting Drives

 on page 30.

For more information on FIPS 140-2 Level 2 certification see 

About FIPS

 on page 29.

These drives provide the following key features:
• 1000 Gs non-operating shock and 400 Gs of operating shock.
• 128MB buffer.
• 5400-RPM spindle speed.
• Full-track multiple-sector transfer capability without local processor intervention.
• High instantaneous (burst) data-transfer rates (up to 6Gb/s).
• MTC Technology

TM

, proprietary data flow management.

• Native Command Queuing (NCQ) with command ordering.
• Quiet operation. Fluid Dynamic Bearing (FDB) motor.
• SeaTools

TM

 diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

• Shingled magnetic recording with perpendicular magnetic recording heads/media.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• Support for Read Multiple and Write Multiple commands.
• Support for S.M.A.R.T. drive monitoring and reporting.
• Worldwide Name (WWN) capability uniquely identifies the drive.

Mobile HDD Self-Encrypting Drive models have the following additional features
• 16 independent data bands
• Authenticated firmware download.
• Automatic data encryption/decryption
• Controlled access
• Cryptographic erase of user data for a drive that will be repurposed or scrapped
• Drive  locking
• Random number generator

There is no significant performance difference between Self-Encrypting Drive and standard (non-Self-Encrypting Drive) models.

Standard

models

Standard SED

models

Standard SED

(FIPS 140-2) models

ST2000LM007

ST2000LM010

ST1500LM012

ST1000LM035

ST1000LM038

ST500LM030

ST500LM032

ST500LM033

Note

Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models 
before a differentiation between drive-based encryption and other forms of encryption was necessary.

Содержание ST1000LM035











































Отзывы:

Нет отзывов

Похожие инструкции для ST1000LM035

Бренды по названию

Популярные бренды

Загрузить еще бренды