Seagate SkyHawk ST3000VX009, Руководство по эксплуатации продукта

Страница: 13 / 36

Seagate SkyHawk Product Manual, Rev. B 12
www.seagate.com Drive Specifications
2.7 Power specifications
The drive receives DC power (+5V or +12V) through a native SATA power connector. Refer to Figure 1 on page 22 .
2.7.1 Power consumption
Power requirements for the drives are listed in Table 2 and Table 3 . Typical power measurements are based on an average
of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. These power
measurements are done with DIPM enabled.
• Spinup current is measured from the time of power-on to the time that the drive spindle reaches operating
speed.
• Operating Power is measured following IDEMA 3 streams standard, assuming CE operating condition
• The drive supports three idle modes: Performance Idle mode, Active Idle mode and Low Power Idle mode.
Refer to Section 2.7.4 for power-management mode.
Table 2 DC power requirements (6TB)
Power dissipation Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps
Spinup — — 1.8
Idle, Low Power 3.4 0.10 0.242
Operating Power 5.0 0.23 0.321
Standby 0.25 0.04 0.004
Sleep 0.25 0.04 0.004
Table 3 DC power requirements (3TB)
Power dissipation Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps
Spinup — — 1.8
Idle, Low Power 2.5 0.12 0.15
Operating Power 3.5 0.24 0.191
Standby 0.25 0.04 0.004
Sleep 0.25 0.04 0.004