Seagate SkyHawk SATA Product Manual, Rev. E
8
*
One GB equals one billion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification,
which may increase acoustic and power to operational levels.
†
Seagate does not recommend operating at sustained case temperatures above 60°C.
Operating at higher temperatures will reduce useful life of the product.
Vibration, operating
5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 0.50 Gs
350–500 Hz: 0.25 Gs
Operation Rotational vibration
20–1500Hz: 12.5 rads/s²
Vibration, non-operating
2–500 Hz: 2.27 Grms ref
Drive acoustics, sound power (bels)
Idle**
2.8 (typical)
3.0 (max)
Performance seek
3.2 (typical)
3.4 (max)
Non-recoverable read errors
1 sector per 10
15
bits read
Annualized Failure Rate (AFR)
0.88% based on 8760 POH
Rated Workload
Average annualized workload rating: <180TB/year
The AFR specification for the product assumes the I/O workload does not exceed the average
annualized workload rate limit of 180 TB/year. Workloads exceeding the annualized rate may
degrade the product AFR and impact reliability as experienced by the particular application. The
average annualized workload rate limit is in units of TB per calendar year.
Warranty
To determine the warranty for a specific drive, use a web browser to access the following web
page:
http://www.seagate.com/support/warranty-and-replacements/
.
From this page, click on the “Is my Drive under Warranty” link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase.The
system will display the warranty information for the drive.
Load-unload cycles
300,000
Supports Hotplug operation per
Serial ATA Revision 3.2 specification
Yes
Drive specification
ST10000VX0004
Поставщик систем безопасности TELECAMERA.RU
