30
Scorpion 40 Installation Manual, Rev. A
3.
Use the config command to rebuild the kernel and include
the new device definition. Refer to the config man page
for details.
Solaris 2.x
1.
To configure Solaris 2.x for compatibility with the
Scorpion 40, add the following lines to the file
st.conf in
the directory /kernel/drv.
tape-config-list=
"SEAGATE DAT 05573-XXX","Seagate DAT Drive","SEAGATE_DAT";
SEAGATE_DAT = 1,0x2c,0,0xd639,4,0x00,0x8C,0x8C,0x8C,3;
Note: The inquiry string above contains four spaces between
the word
DAT
and the value
05573
.
2.
After modifying the file
st.conf, you must reconfigure the
kernel by booting the system using the boot -r command
