Seagate Momentus 7200 FDE.1 SATA, Руководство по эксплуатации продукта

Страница: 12 / 64

6 Momentus 7200 FDE.1 SATA Product Manual, Rev. A
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
Read power (typical) 2.1 watts
Write power (typical) 2.3 watts
Idle mode, low power (typical) 0.75 watts
Standby mode 0.21 watts (typical)***
Sleep mode 0.21 watts (typical)***
Voltage tolerance (including noise) +5V ± 5%
Ambient temperature 0° to 60°C (operating), –40° to 70°C (nonoperating)
Temperature gradient (°C per hour max) 20°C (operating)
35°C (nonoperating)
Relative humidity 5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient 30% per hour max
Wet bulb temperature (max) 30°C (operating)
40°C (nonoperating)
Altitude, operating –60.96 m to 3,048 m (–200 ft to 10,000
+
ft)
Altitude, nonoperating
(meters below mean sea level, max)
–304.8 m to 12,192 m (–1000 ft to 40,000
+
ft)
Shock, operating
(Gs max at 2 msec)
350
Shock, nonoperating
(Gs max at 2 msec)
800
Shock, nonoperating
(Gs max at 1 msec)
1,000
Shock, nonoperating
(Gs max at 0.5 msec)
600
Vibration, operating 1.0 G (0 to peak, 5–500 Hz)
Vibration, nonoperating 5 Gs (0 to peak, 5–500 Hz)
Drive acoustics, sound power (bels)
Idle** 2.3 (typical)
2.5 (max)
Performance seek 2.6 (typical)
2.7 (max)
Nonrecoverable read errors 1 per 10
14
bits read
Annualized Failure Rate (AFR) 0.48%
Load/Unload (U/UL) cycles
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 10% relative humidity
55°C, 16% relative humidity
600,000 software-controlled power on/off cycles
50,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
50,000 hard power on/off cycles
Warranty 5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access the follow-
ing web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be asked to provide
the drive serial number, model number (or part number) and country of purchase. The
system will display the warranty information for your drive.
Supports Hotplug operation per Serial ATA
Revision 2.5 specification Yes (requires COMPRESET from host after a hotplug event)
Table 2: Drive specifications
Drive specification
ST9320424AS
ST9320424ASG
ST9250424AS
ST9250424ASG
ST9160414AS
ST9160414ASG
ST9120414AS
ST9120414ASG ST980414ASG