Seagate Lyve Drive Shuttle, Руководство пользователя

Страница: 23 / 35

MM Minutes
UUID Universally unique identifier designating the device from which
the files were copied
N Session number
Take for example the following directory:
20201001.1306.XFGT6G.1
Lyve Drive Shuttle would have created this directory on October 1, 2020, at 1:06pm. The source of the
content was a device with a UUID of XFGT6G. This was the first upload of content from this device on this
day.
Folder naming conven ons
When viewing your copied files in Lyve Drive Shuttle > Backups, folder names created during incremental
copies are appended with
_update
. Folder names from copies that were interrupted are appended with
_incomplete
.
Backup type Sample folder name
Full 20200401_1120_Garmin_VirbUltra30_878555
Incremental 20200401_1120_Garmin_VirbUltra30_878555_update
Incomplete 20200401_1120_Garmin_VirbUltra30_878555_incomplete
Performing incremental copies
When a new storage device is detected, Lyve Drive Shuttle will copy all files from the source. If the same
drive is connected again at a later date, Lyve Drive Shuttle will perform either a full or incremental copy,
depending on your copy settings.
Full All files on the storage device are copied,
regardless of whether some or even all files on
the device were copied previously.
Incremental Only new files on a previously ingested storage
devices are copied to Lyve Drive Shuttle.
Incremental copies can save storage space and
copying time.
Enabling incremental copies
23 Seagate Lyve Drive Shuttle 4/20/20