Seagate IRONWOLF ST10000VN0004 Скачать руководство пользователя страница 2

©  2017 Seagate Technology LLC. All rights reserved.

Publication number: 100804010, Rev. E November 2017
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. IronWolf, PowerChoice and SeaTools 
are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification

 

mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective

 

owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.
Call 877-PUB-TEK1 (877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different 
standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. 
Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment 
and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for 

Document Revision History

Revision

Date

Pages affected and Description of changes

Rev. A

07/08/2016

Initial release.

Rev. B

12/08/2016

fc:   Applied new IronWolf logo

 

fc, 5-10, 21 & 26:   Add 8TB model = ST8000VN0004

 

8 & 26:   Corrected 10TB LBA count

 

17:   Added MSIP Korean text for Class B device warning

Rev. C

01/25/2017

fc, 5-10, 21 & 26:   Remove 8TB model = ST8000VN0004

Rev. D

10/062017

13:   Updated Figure 2. Location of the HDA temperature check point

 

17-19:   Updated Safety, EMC, FCC & RoHS Sections 2.11 through 2.12.3, per Compliance Council

Rev. E

11/03/2017

19:   Updated Table 6: Taiwan - Restricted Substances - Unit row headers= HDD & PCBA

 

22:   Updated fastener penetration depth in Section 3.4 & Fig. 4 = 0.140 in.

Содержание IRONWOLF ST10000VN0004

































Отзывы: