Seagate IronWolf Pro ST2000NE001, Руководство по эксплуатации продукта

Страница: 27 / 37

Seagate IronWolf Pro SATA Product Manual, Rev. J 26
3.4 Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes.
See
Figure 6 , Figure 7 and Figure 8 for drive mounting dimensions. Follow these important mounting precautions when mounting the
drive:
• Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.140 in (3.56mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 in-lb).
3.4.1 Mechanical specifications
Refer to
Figure 6
for detailed mounting configuration dimensions.
See “Drive mounting” on page 26.
Figure 6. Mounting configuration dimensions 8TB & 6TB models (Option 1)
Weight: 8TB model 1.59 lb 720g
6TB model 1.58 lb 716g
4TB model 1.43 lb 650g
2TB model 1.37 lb 620g
Note
These dimensions conform to the Small Form Factor Standard documented in
SFF-8301 and SFF-8323, found at
www.sffcommittee.org
Note The image is for mechanical dimension reference only and may not represent the actual drive.
2X 1.750±.010
2X 3.000±.010
3X 3.750±.010
3X.125±.010
2X 1.432±.020
2X 1.625±.020
.814±.020
CL OF DRIVE CL OF CONN
3X .250±.010
BOTH SIDES
1.122±.020
1.638±.010
4.000±.010
1.028 MAX
[26.10MM]
.138±.015
2.000
CL OF DRIVE
5.787 MAX
[147.00 MM]
4.000±.010
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.160 ± 0.10 x 90
MAX TORQUE: 6 IN-LBS
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.169 ± 0.16 x 90
MAX TORQUE: 6 IN-LBS
BREATHER HOLE
DO NOT COVER