Seagate IronWolf Pro ST10000NE000, Руководство по эксплуатации продукта

Страница: 10 / 31

Seagate IronWolf Pro Serial ATA Product Manual, Rev. B 9
2.5 Power specifications
The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 3 on page 20 .
2.5.1 Power consumption
Power requirements for the drives are listed in Table 2 . Typical power measurements are based on an average of drives tested, under
nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature.
Table 2 DC Power Requirements (5-disk models)
Power Dissipation Avg (25°C) (Watts) Avg 5V typical (Amps) Avg 12V typical (Amps)
Spinup (max) 1.8A
Idle
1
1. During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational
levels.
* Based on IDEMA 3 Stream workload
7.76 0.325 0.512
Operating
*
10.09 0.542 0.6144
Standby 0.96 0.185 0.003
Sleep 0.96 0.185 0.003