Seagate Elite 9, Руководство по эксплуатации продукта

Страница: 56 / 82

46 Elite 9 Product Manual, Rev. C
11.3 SCSI interface commands supported
Table 4 lists the SCSI interface commands supported in SCSI-1 and
SCSI-2 modes. Elite 9 family drives can be changed back and forth
between SCSI-1 and SCSI-2 modes using the Change Definition com-
mand. Standard OEM drives are shipped set to operate in SCSI-2 mode.
Table 4. Supported commands
Command Supported by
Command name code SCSI-1 SCSI-2
Change Definition 40h Y Y
Compare 39h N N
Copy 18h N N
Copy and Verify 3Ah N N
Format Unit [1] 04h Y Y
Inquiry 12h Y Y
Date Code Page N Y
Firmware Numbers Page N Y
Implemented Operating Def. Page N Y
Jumper Settings Page N Y
Unit Serial Number Page N Y
Vital Product Data Page N Y
Lock-Unlock-Cache 36h N N
Log Select 4Ch Y Y
Log Sense 4Dh Y Y
Mode Select 15h Y Y
Same pages as Mode Sense command
Mode Select (10)
55h N Y
Mode Sense 1Ah Y Y
Mode Sense (10) 5Ah N Y
Caching Parameters Page (08h) N Y
Control Mode Page (0Ah) N Y
Disconnect/Reconnect Control Page (02h) Y Y
Error Recovery Page (01h) Y Y
Format Page (03h) Y Y
Notch and Partition Page (0C) (media zones) N Y
Rigid Disc Drive Geometry Page (04h) Y Y
Unit Attention Page (00h) Y Y
Verify Error Recovery Page (07h) N Y
Not used 42-4Bh N N
Not used 4E-54 N N
Not used 58-59 N N
Not used 5B-5F N N
Not used 60-BFh N N
Not used C0-DFh N N
Not used E0-FFh N N
continued