Seagate Constellation ES.1 Serial ATA Скачать руководство пользователя | Manualshive

Страница: 21 / 54

background image

Constellation ES.1 Serial ATA Product Manual, Rev. B

15

3.8.4

Power-management modes

The drive provides programmable power management to provide greater energy efficiency. In most systems,
you can control power management through the system setup program. The drive features the following
power-management modes:

•

Active mode

The drive is in Active mode during the read/write and seek operations.

• Idle mode

The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc
access is necessary.

•

Standby mode

The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set
the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for
a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In
Standby mode, the

drive buffer is enabled, the heads are parked and the spindle is at rest. The drive

accepts all commands and returns to Active mode any time disc access is necessary.

• Sleep mode

The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buf-
fer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it
receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and
enters Standby mode with all current translation parameters intact.

• Idle and Standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and
begins counting down from its specified delay times to zero. If the standby timer reaches zero before any
drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the
drive accepts all commands and returns to Active mode when disc access is necessary.

Power modes

Heads

Spindle

Buffer

Active

Tracking

Rotating

Enabled

Idle_a

ID Biased

Rotating

Enabled

Idle_b

Parked

Rotating

Enabled

Idle_c

Parked

Rotating at lower RPM

Enabled

Standby

Parked Stopped

Enabled

Sleep

Parked

Stopped

Disabled

«
...
19
20
21
22
23
...
»

Содержание Constellation ES.1 Serial ATA























































Отзывы:

Нет отзывов

Похожие инструкции для Constellation ES.1 Serial ATA

Бренд: Angelbird Страницы: 20

Cruizer Enterprise

Бренд: SanDisk Страницы: 10

Бренд: TRINITY Pro Страницы: 12

Бренд: Dancover Страницы: 36

Бренд: JOBO Страницы: 20

Бренд: Backyard Страницы: 60

Бренд: Ranger design Страницы: 16

1.8" StoreJet Portable HDD 20GB (TOSHIBA) TS20GSJ18

Бренд: Transcend Страницы: 6

Бренд: Argus Страницы: 1

Memorator Pro 5xHS

Бренд: Kvaser Страницы: 27

Бренд: HOLZMANN MASCHINEN Страницы: 18

Бренд: D-Link Страницы: 69

ShareCenter Pro DNS-1200-05

Бренд: D-Link Страницы: 170

UltraHD UltraGuard WEB347

Бренд: Seville Classics Страницы: 13

Бренд: Samsung Страницы: 1

Бренд: Samsung Страницы: 2

HD161HJ - SpinPoint S166 160 GB Hard Drive

Бренд: Samsung Страницы: 2

HD321KJ - SpinPoint T166 320 GB Hard Drive

Бренд: Samsung Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды