Seagate Cheetah ST173404FC, Руководство по эксплуатации продукта

Страница: 67 / 80

Cheetah 73FC Product Manual, Rev. C 57
9.6 Signal characteristics
This section describes the electrical signal characteristics of the drive’s input and output signals. See Table 19
on page 52 for signal type and signal name information.
9.6.1 TTL input characteristics
Table 24 provides the TTL characteristics.
9.6.2 LED driver signals
Fault and Active LED signals are located in the FC-SCA connector (J1) and through the indicator connector
(J6). See Table 25 for the output characteristics of the LED drive signals.
9.6.3 Differential PECL output
The serial PECL output signal voltage characteristics are provided in Table 26. The outputs are not AC coupled
in order to deliver maximum signal without rise and fall time degradation. You must AC couple the receiver to
isolate potentially different DC characteristics of the outputs and the receiver.
Table 24: TTL characteristics
State Voltage Current
Input high 1.9 < V
IH
< 5.5V I
IH
= ±500nA max.
Input low -0.5V < V
IL
< 0.9V I
OL
= ±500nA max.
Output high (-EN Bypass A, B) 2.4 < V
OH
< 5.25V I
OH
< -3mA
Output low (-EN Bypass A, B) V
OL
< 0.5V I
OL
< 3mA
Output high (-Parallel ESI) 2.4 < V
OH
< 0.9 V
CC
V
OH
> 0.9V
CC
I
OH
< -2.4mA
I
OH
< -500µA
Output low (-Parallel ESI) 0 < V
OL
< .45V I
OL
< 2.4mA
Output high (all other outputs) 2.4 < V
OH
< 0.9 V
CC
V
OH
> 0.9V
CC
I
OH
< -1.6mA
I
OH
< -500µA
Output low (all other outputs) 0 < V
OL
< .45V I
OL
< 1.6mA
Table 25: LED drive signal
State Current drive available Output voltage
LED off, high 0 < I
OH
< 100µA
LED on, low I
OL
< -30 mA 0 < V
OL
< 0.8V
Table 26: Differential PECL output characteristics
Description Parameter
Serial output voltage swing 300 < V
out
< 650 mV