Seagate Cheetah 73LP FC ST336605FC Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 82

background image

Cheetah 73LP FC Product Manual, Rev. D

5

3.0

General description

Cheetah

TM

73LP FC drives combine giant magnetoresistive (GMR) heads, partial response/maximum likeli-

hood (PRML) read channel electronics, embedded servo technology, and a Fibre Channel interface to provide
high performance, high capacity data storage for a variety of systems including engineering workstations, net-
work servers, mainframes, and supercomputers.

Cheetah 73LP FC drives are random access storage devices designed to support the Fibre Channel Arbitrated
Loop (FC-AL) and SCSI Fibre Channel Protocol as described in the ANSI specifications, this document, and
the

Fibre Channel Interface Manual

(part number 77767496) which describes the general interface character-

istics of this drive. Cheetah 73LP FC drives are classified as intelligent peripherals and provide level 2 conform-
ance (highest level) with the ANSI SCSI standard.

The head and disc assembly (HDA) is sealed at the factory. Air recirculates within the HDA through a non-
replaceable filter to maintain a contamination-free HDA environment.

See Figure 2 for an exploded view of the drive. Never disassemble the HDA. This exploded view is for informa-
tion only. Do not attempt to service items in the sealed enclosure (heads, media, actuator, etc.) as this requires
special facilities. The drive contains no parts replaceable by the user and opening the HDA for any reason
voids your warranty.

Figure 2.

Cheetah 73LP FC disc drive

Cheetah 73LP FC drives use a dedicated landing zone at the innermost radius of the media to eliminate the
possibility of destroying or degrading data by landing in the data zone. The heads automatically go to the land-
ing zone when power is removed from the drive.

An automatic shipping lock prevents potential damage to the heads and discs that results from movement dur-
ing shipping and handling. The shipping lock disengages and the head load process begins when power is
applied to the drive.

Cheetah 73LP FC drives decode track 0 location data from the servo data embedded on each surface to elimi-
nate mechanical transducer adjustments and related reliability concerns.

The drives also use a high-performance actuator assembly with a low-inertia, balanced, patented, straight arm
design that provides excellent performance with minimal power dissipation.

«
...
13
14
15
16
17
...
»

Содержание Cheetah 73LP FC ST336605FC



















































































Отзывы:

Нет отзывов

Похожие инструкции для Cheetah 73LP FC ST336605FC

Бренд: IAC INDUSTRIES Страницы: 9

HD080HJ - 80 GB Hard Drive

Бренд: Samsung Страницы: 2

G2 PORTABLE HX-MU025DC

Бренд: Samsung Страницы: 36

Бренд: SanDisk Страницы: 2

Cold Frame Single

Бренд: Palram Страницы: 11

Бренд: Quantum Страницы: 78

Бренд: Quantum Страницы: 3

Galaxy A16F-G2422

Бренд: Rorke Data Страницы: 108

Бренд: Infrant Technologies Страницы: 98

Бренд: D-Link Страницы: 69

ShareCenter Pro DNS-1200-05

Бренд: D-Link Страницы: 170

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 8

Pavilion 4500 - Desktop PC

Бренд: Seagate Страницы: 2

Momentus ST160LT003 - 9YG141

Бренд: Seagate Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды